ZN23203 electromagnetic clamp

EMC Test Clamp

The ZN23203 electromagnetic clamp complies with the national standard IEC 61000-4-6. It is a special product for testing the immunity of conduction disturbance induced by radio frequency field. It injects the disturbance signal into the cable assembly in the card slot, so that the EUT under test can withstand the requirements of the national standard.

0

0

0

发布时间: 2023-01-05 16:54:06

Characteristics:

The ZN23203 electromagnetic clamp complies with the national standard IEC 61000-4-6. It is a special product for testing the immunity of conduction disturbance induced by radio frequency field. It injects the disturbance signal into the cable assembly in the card slot, so that the EUT under test can withstand the requirements of the national standard. 

When measuring accurately, the electromagnetic pliers are also equipped with auxiliary absorbing pliers and calibration pieces.

1. For the coupling coefficient and attenuation characteristic curve, see Table 1 and Table 2, the difference is 9.5dB±1.5dB.
2. The maximum injection power is 100W (5 minutes);
3. Injection frequency 150kHz～230MHz;
4. Coupling and decoupling direction coefficient greater than 10dB>10MHz
5. Measurable cable diameter: <Φ18mm